Windows XP L2TP Vpn Setup

Automated Setup

Just download, install and login with the username and password you received in our welcome mail.
Once installed you can switch locations, easily connect and disconnect, view stats and much more.

Below you can find a step-by-step manual to configure a L2TP (Layer 2 Tunneling Protocol) VPN connection manually on Windows XP, 2000 or 2003 in only 17 steps:

Compatible with all Windows versions

Download Software

Follow these simple steps to install VPN on Windows XP, 2000 or 2003 using the L2TP protocol.

• 1 -Click Start menu and then Control Panel.
  

  2 – Choose – “Network and Internet Connections”. If you can’t find “Network and Internet Connections“, then “Switch to Category View“

   

• 3- Choose – “Create a connection to the network at your workplace“

  

  4- Choose – “Virtual Private Network connection“

  

• 5 – Fill in a random name for the VPN connection

  

  6- Fill in the VPN server hostname (you can find these in our Welcome Email)

  Server address

  

• 7- Click – “Finish“

• 

• 8- Click on “Network Connections“

• 

• 9-Right click on the VPN connection you just created and choose “Properties“

  

  10- Go to the “Networking” tab and select “L2TP IPSec VPN” from the dropdown menu

  

• 11- Go to the “Security” tab and click on “IPSec Settings…“
  
  12 – Enable “✓ Use pre-shared key for authentication” and fill in the Key: vpncenter
  Then click “OK“

  

• 13- Click on “OK” again

• 14-Right click on the VPN network you just created can choose “Connect“

  

• 15-Fill in the username and password which you can find in the Welcome Email we sent and click on “Connectâ€‌

  

16-It will now verify your login details

17- You are now connected!

First connection usually takes not more than a minute. After connection you should now see the VPN connection successfully established.