download and install the software cisco anyconnect.

Download cisco anyconnect

Click on the icon to run the software.

Click the settings icon

1 - Cisco anyconnect lerning

Block Connections To Untrusted Servers uncheck the checkbox

Picture2 - Cisco anyconnect lerning
Enter the server address and click on connect

2 4 - Cisco anyconnect lerning

Server list :

nl-ssl.vpncenter.co
uk-ssl.vpncenter.co
us-ssl.vpncenter.co
de-ssl.vpncenter.co
fr-ssl.vpncenter.co

SERVER LIST

Click on the connect anyway.

3 4 - Cisco anyconnect lerning

Enter your account username and click on ok.

4 4 - Cisco anyconnect lerning

Enter your account password and click on ok.

5 2 - Cisco anyconnect lerning

Then click on connect annyway.

7 3 - Cisco anyconnect lerning

Wait, are connected to the Cisco Service.

6 2 - Cisco anyconnect lerning

Download

This is the new AnyConnect application for Apple iOS.

Install AnyConnect VPN for Apple iOS Devices

Follow the steps below to install the Cisco AnyConnect client on your iPhone, iPad or iPod. The instructions are basically the same for all Apple iOS devices, but they may vary slightly based on the device and the version you are running.

  1. Verify that you have an iTunes account.
  2. Install the Cisco AnyConnect client from the Apple App Store. To do this, open the App Store on your device.
  3. Select “Search”.
  4. In the Search Box, enter “anyconnect” and tap “cisco anyconnect” in the Suggestions list.
  5. Tap “AnyConnect”.
  6. Tap “Free”, then “INSTALL APP”.
  7. Select “Install”.
  8. Enter your iTunes account password.
  9. Swipe to the right of the home screen and then tap the Cisco AnyConnect icon.
  10. A confirmation window opens the first time you start AnyConnect on the device that reads “Cisco AnyConnect Secure Mobility Client extends the Virtual Private Network (VPN) capabilities of your device. Do you want to enable this software?”
  11. Tap “OK”. AnyConnect shows the VPN connection status in the AnyConnect home screen.
  12. Tap “Add VPN Connection” in the AnyConnect home window.
  13. In the Description Field, enter “VPNCENTER”.
  14. In the Server Address field, enter “nl-ssl.vpncenter.co“.
  15. Tap “Save”.

SERVER LIST

Connect to AnyConnect VPN for Apple iOS Devices

Follow the instructions below to connect to the VPN.

  1. Swipe to the right of the home screen and then tap the Cisco AnyConnect icon.
  2. Select the “VPNCENTER” entry.
  3. Slide the AnyConnect VPN button to “ON”.
  4. Enter your University of Minnesota Internet ID and password.
  5. On the Authentication bar press “Connect”.
  6. Verify that the status line says “Connected”.